High Temperature P84 needle punched felt cement dust collector Filter Bag Cloth
1.Customize of p84 filter fabrics according to working conditions
selected material is strong and durable,with 1-3 years warranty according to different working conditions special reinforcement of bottom pocket,not easy to fall off,break wire,air leakage integrity management,quality assurance,we are not afraid to shop around,we only use quality and service competition.
2.The function of the cell plate of the bag filter
The cell plate plays the role of fixing the filter bag in the bag filter, forming a seal with the filter bag, and separating the bag chamber and the box body. In the maintenance of the dust collector, the influence of the flower plate on the dust collection effect of the dust collector is often ignored. The size and size of the cell plate on the upper part of the bag filter can be determined according to the different design of the dust collector. The size of the hole on the same cell plate should be unified to avoid the occurrence of improper or swelling due to the expansion of the dust bag. For the phenomenon that the ring does not open, and the dust leaks, the size of the dust collector cell plate depends on the blowing ability of the pulse valve. In addition to bearing the weight of the filter bag and the bag cage, the cell plate also bears the gas pressure in the dust collector, so it must have sufficient rigidity. The thickness of the steel plate of the cell plate of the general bag filter is generally 4~6mm, which mainly depends on the number of dust-removing bags hanging in the filter room. In order to increase the rigidity of the flower plate, a reinforcing rib should be added to the flower plate. The processing of the cell plate should be punched or plasma cutting, gas cutting is not allowed, the appearance of the cell plate should be smooth and clean after production, there should be no warping or unevenness defects, and the flatness deviation should not be greater than the length of the pattern Of 2/1000.
Our products P84 Yellow Needle Punched Non Woven FELT are suitable for a variety of complex conditions, if you have any questions, please contact us
Technical Specification |
||
Name/Quality |
100% P84 |
|
Component |
Shell Fiber |
100% P84 |
|
Scrim |
100% PTFE |
Weight |
500±5% gsm |
|
Thickness |
2.2±0.2mm |
|
Air Permeability /200Pa L/dm2.min |
130-180 |
|
Tensile Strength N/5*20CM |
Length |
≥800 |
|
Cross |
≥1200 |
Elongation at break % |
Length |
≤30 |
|
Cross |
≤50 |
Temperature ( Celsius Degree) |
Continue |
240 |
|
Peaks |
260 |
Finish |
Singeing, Calendering, Heat-set |
|
Use Scope |
Cement, Steel, Construction, Metallurgy |
3.Remarks
1) The length of dust filter bags: can be customized
Usual size: diameter 100mm, 125mm, 130mm, 150mm, 180mm, 250mm ect.
2) Process Method: automatic sewing or welded
3)Prodction details:Double bottoms and reinforcement to make abrasion resistance.
Sewing thread: PTFE thread, polyester thread.
4)Inspection: Filter bags will be according to the national standards, industry
standards and enterprise standards.
5) If your required filter bag is different from our usual one, then please send us your drawing picture and choose material you need since we also produce the nonstandard filter bag.
4.Advantages of the product:
1.Various material: Polyester(PE), Polypropylen(PP), Aramid, P84, Acrylic, PPS, Fiberglass, PTFE,Nomex,FMS etc.
2.Strong intensity
3.Excellent anti-abrasion,good finishing treatment
4.Good raw material, competitive price
5.High filtration efficiency
6.Fast delivery
7.Size can be customized
8.Factory manufacturer could contal quality and price
9.Strict quality inspection and contol
10.Professional designer teams to match with your operating condition
Application Area:
It is suitable for dust collection of chemical industry, melting of metal, waste incineration, cement kiln tail and coal-fired boiler.
The dust collection system filter fabrics packaging:
Different types of filter cloth must be individually packaged. ususllay pack into a woven bag,then finally into a pe bag in case in damp.
FRQ:
Q1. What is your terms of payment?
A: T/T will usually be accepted,details could be negotiated.
Q2. What is your terms of delivery?
A: FOB, CFR, CIF, DDU,EXW
Q3. How about your delivery time?
A: Generally, it will take 10to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q4. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Q5. What is your sample policy?
A: we could offer the sample for free charge but do not pay the cost of freight.
Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them.