Stainless Steel Bag Cage

Specifications: Feature: Industry Sewing Thread Product Name: 100% Spun PTFE Sewing Thread Pattern: filament Free samples: yes OEM: yes

Wire Cages are professionally manufactured, constructed from galvanized or stainless steel and welded for structural stability.

The filter bag cage is the support of filter bag and it should be light and easy for installation and maintenance. The quality of filter cage has directly bearing on the filtering state and service life of a filter bag. Every cage we make can meet the requirement for tightness, smoothness and uprightness.

The melting temperature of PPS is as high as 285℃。PPS felts is sensiti to oxygen under high temperature.

Product Name PPS/PPS filter media PPS/PPS membrane filter media PPS/PTFE filter media PPS/PTFE membrane filter media Fiber PPS PPS Scrim PPS PTFE Grammage（g/m2） 580 600 Continuous temperature（℃） 160 160 Peak temperature（℃） 190 190 Breaking Strength（N/5*20cm） Warp ＞900 ＞900 Weft ＞1200 ＞1200 Elongation at break% Warp ＜30 ＜30 Weft ＜50 ＜50 Air permeability（m3/m2*min） 10~15 2~5 10~15 2~5 Using scope Low sulfur coal, temperature <160℃, low oxygen content High precision emission requirements, low sulfur coal, temperature <160°C, low oxygen content Medium sulfur coal, temperature <165°C (higher instantaneous temperature and higher oxygen content) Medium sulfur coal, temperature <165°C (higher instantaneous temperature and higher oxygen content)

Since the white fiber is produced by the film splitting method, the dispersion in fineness is relatively large, generally from 2dtex to 10dtex. The brown fiber is wet-spinned, so the fiber fineness is relatively fixed. At present, it is 3.3dtex in foreign countries, and the single yarn strength is generally above 4dtex in China. The length is generally 51mm~75mm. The melting point of PTFE is 327 °C, and it can be used for a long time at a high temperature of 260 °C, and the instantaneous use temperature can exceed 300 °C. PTFE cannot burn, and its limiting oxygen index reaches 95%. The strength is low and the breaking elongation is small. The breaking strength of the imported brown fiber is only 1.9cn/dtex, while the strength of the white imported fiber basically does not exceed 4cn/dtex. The friction coefficient is low, so the dust is easy to fall off on the surface of the filter material. The surface tension of the fiber is large, and it has good water repellency. The fiber is finer, the filtration efficiency is average, and the filter material has a weight of 750-800g. The textile performance is not good, the cohesive force is low, and static electricity is easily generated in the fiber spinning process.

1.Capacity of SUS304 filter cage: 30000PCS / month 2.Three materials can be choosed: Galvanized, Silicon power plated and Stainless steel. The filter cage is the support of filter bag and it should be light and easy for installation and maintenance. The quality of filter cage has directly bearing on the filtering state and service life of a filter bag. Every cages we make can meet the requirement for tightness, smoothness and uprightness.

We make different types of stainless steel filter cages,SS filter cage with top and bottom rings,split type SS filter bag cages,round or flat SS baghouse cages,special stainless steel filter bag cage for baghouse.Our cages can be fabricated in many different types of materials,coatings,lengths,and specifications