Dust Collector Cages made from Yuanchen are to fit most baghouse makes and models. Common cage constructions consist of 10, 12 or 20 vertical wires. Standard horizontal ring spacings are 4”, 6” or 8”. If clean air plenum height restrictions are a problem, two piece cages are available. For areas where moisture or acid corrosion are present we provides a range of materials and coatings.

The melting temperature of PPS is as high as 285℃。PPS felts is sensiti to oxygen under high temperature.

The cage is the "rib" of the filter bag. It is welded once by automatic welding equipment. The welding is firm and the appearance is smooth and straight, so that the filter bag is not damaged. It is light and easy to install and maintain. Zinc plating or plastic spraying process is used for surface post-treatment.

1.Capacity of SUS304 filter cage: 30000PCS / month 2.Three materials can be choosed: Galvanized, Silicon power plated and Stainless steel. The filter cage is the support of filter bag and it should be light and easy for installation and maintenance. The quality of filter cage has directly bearing on the filtering state and service life of a filter bag. Every cages we make can meet the requirement for tightness, smoothness and uprightness.

Selective catalytic reduction (SCR) catalyst called SCR flue gas denitrationcatalyst, SCR technology is denitration catalyst in the appropriate temperature, using ammonia (NH3) as the reducing agent, take the advantage of the reducing agent selective, preferentially reaction with industrial flue gas of nitrogen oxide (NOx), NOx is converted into no pollution of nitrogen and water, and NOx reduction efficiency is as high as above 90%. Thereby reducing NOx emissions, and reducing smoke pollution to the environment. SCR denitration technology has become the mainstream technology of flue gas denitrification in the world.

We make filter bags to fit most styles and types of bag houses and other dust collection systems.  Filter bags come in a wide range of fabrics, coatings, finishes, sizes and configurations.Medias are available in various fabric weights and treatments such as singed, glazed, PTFEmembrane, anti-static,  acid resistant and more

Long-term temperature resistance of 260℃, instantaneous temperature resistance of 300℃, is a kind of filter material with excellent high temperature resistance, acid and alkali resistance. It has various characteristics as a high-performance fiber; it can resist a variety of acids, alkalis and Chemical corrosion of oxidizer; has good hydrolysis resistance; typical applications are Cement,Waste Incineration.

Long-term temperature resistance of 260℃, instantaneous temperature resistance of 300℃, is a kind of filter material with excellent high temperature resistance, acid and alkali resistance. It has various characteristics as a high-performance fiber; it can resist a variety of acids, alkalis and Chemical corrosion of oxidizer; has good hydrolysis resistance; typical applications are Cement,Waste Incineration.

Since the white fiber is produced by the film splitting method, the dispersion in fineness is relatively large, generally from 2dtex to 10dtex. The brown fiber is wet-spinned, so the fiber fineness is relatively fixed. At present, it is 3.3dtex in foreign countries, and the single yarn strength is generally above 4dtex in China. The length is generally 51mm~75mm. The melting point of PTFE is 327 °C, and it can be used for a long time at a high temperature of 260 °C, and the instantaneous use temperature can exceed 300 °C. PTFE cannot burn, and its limiting oxygen index reaches 95%. The strength is low and the breaking elongation is small. The breaking strength of the imported brown fiber is only 1.9cn/dtex, while the strength of the white imported fiber basically does not exceed 4cn/dtex. The friction coefficient is low, so the dust is easy to fall off on the surface of the filter material. The surface tension of the fiber is large, and it has good water repellency. The fiber is finer, the filtration efficiency is average, and the filter material has a weight of 750-800g. The textile performance is not good, the cohesive force is low, and static electricity is easily generated in the fiber spinning process.